simulation method
英 [ˌsɪmjuˈleɪʃn ˈmeθəd]
美 [ˌsɪmjuˈleɪʃn ˈmeθəd]
网络 模拟方法; 模拟法; 仿真方法; 系统仿真法; 仿真算法
双语例句
- A numerical example using Monte Carlo simulation method is presented to verify the effectiveness of the proposed model.
采用蒙特卡洛模拟方法的算例表明了该模型的有效性。 - For general engineering cases, a numerical simulation method is employed to perform the FRS analysis with correlative variables.
对于工程中的一般情况，给出了可靠性灵敏度分析的数字模拟方法。 - A simulation method of resonance reaction yield curve is reported.
报道了一种模拟共振反应产额曲线的方法。 - The simulation method is used for quantitative study for the first time in this paper.
文章首次对步进电动机的振动特性用仿真的方法进行定量研究。 - The numerical simulation method used here can be sued in any mie scattering lidar system design.
文中介绍的数值模拟方法，适用于各种米散射激光雷达性能的研究。 - Finally, the causes of runoff variation in Sanchuanhe River Basin were analyzed with hydrological simulation method.
采用水文模拟途径分析了三川河流域径流量的变化原因。 - The simulation method of Three Dimensional Motor servo system are presented.
给出了三维电动机伺服系统一种整体仿真的方法。 - Difficulty encountered in evaluating complex electric field by optimized charge simulation method has been examined and overcome.
本文研究了将优化模拟电荷法应用于复杂电场计算中的困难，并提出了解决办法。 - Finally, the validity of the simulation method is verified by the simulation test.
最后，通过仿真试验证实了仿真方法的有效性。 - A link to system simulation method of MIMO
一种MIMO系统的链路到系统仿真映像方法 - We also give the computer simulation method of notochord development in the African frog Xenopus Laevis.
本文还介绍了非洲爪蟾脊索器官形成的计算机仿真方法。 - This simulation method is of important reference value to3D stress field treatment in geotechnical engineering.
模拟方法对有关岩土工程中3D地应力场的处理有重要参考价值。 - The joint simulation method of ADAMS and MATLAB provided a new way for the dynamic simulation of automobile.
ADAMS和MATLAB联合仿真方法为汽车动力学仿真提供了一种新途径。 - A simulation method of direct torque control system of induction motor is presented, based on MATLAB.
介绍了一种基于MATLAB的异步电动机直接转矩控制系统的仿真方法。 - With numerical simulation method, the distribution law of coal pillar support pressure in the floor was studied.
运用数值模拟分析方法，研究煤柱支承压力在底板的分布规律。 - Based on the analysis of ideal arrival rate under the effect on weaving segment, the model of lane group's capacity was established, and tested with simulation method.
基于对交织段影响下的交叉口理想到达率的分析，建立了考虑交织段情况下的车道组通行能力计算模型，并通过仿真对模型进行了检验。 - This paper describes and analyses design method and realize process of realizing PCM TDM transmission by simulation method.
本文通过仿真展示了PCM时分复用实现的设计思路及具体过程，并加以进行分析。 - Accordingly, this simulation method can be used in the real design of cusp magnetic field.
该模拟方法可用于勾形磁场的实际设计。 - Importance sampling technique is an effective variance reduction technique in Monte Carlo simulation method for pricing options.
在期权定价的蒙特卡罗模拟中，重要性抽样是一种有效的方差减小技术。 - A test system based simulation method and computer of the missile is designed for efficient research on missile's control and guidance method.
为了更有效地对导弹制导与控制技术进行研究，设计了一种以仿真技术和弹上计算机相结合的测试系统。 - An infrared image simulation method is proposed.
本文提出了一种红外图像仿真方法。 - The simulative analysis of automotive semi-active suspension frame system adopted the ADAMS and MATLAB joint simulation method.
文中对汽车半主动悬架系统的仿真分析采用了ADAMS和MATLAB联合仿真方法。 - The article makes the discussion on the application of scenario simulation method in the teaching of Tour Guide Service.
本文就情景模拟教学法在《导游业务》课程教学中的具体应用进行了探讨。 - Using numerical simulation method, the forming process of joint tray was simulated, and its tradition technology was optimized.
运用数值模拟方法对连接盘的成形过程进行模拟，对其传统工艺进行优化。 - Simulation Method of the Earth Model Based on OpenGL
基于OpenGL的地球模型仿真方法研究 - The friction torque is calculated in this paper, and Using ABAQUS simulation method is obtained under high-pressure kelly cock sealing contact analysis results, Two results coincide.
本文对摩擦力矩进行了计算，同时利用ABAQUS仿真的方法获得了高压下方钻杆旋塞阀的密封接触分析结果，两种方法得到的结果基本吻合。 - A multi-level simulation method is presented for predicting the elastic moduli of hardened cement paste.
提出了硬化水泥石弹性模量预测的分级模拟方法。 - To simplify the programming and optimize control arithmetic, a HIL real-time simulation method of UAV servo was introduced.
为简化编程及优化控制律，介绍了一种无人机舵机的HIL实时仿真方法。 - The numerical simulation method of finite element can substitute the dynamic tri-axial test to a certain extent.
有限元数值模拟方法在一定程度上可以替代动三轴实验。